MP3320NGG-P

Monolithic Power Systems (MPS)
946-MP3320NGG-P
MP3320NGG-P

Herst.:

Beschreibung:
Driver ICs LED-Beleuchtungstreiber 3 Channels, Charge Pump RGB LED Driver

Lebenszyklus:
Neu bei Mouser
ECAD Model:
Den kostenlosen Library Loader herunterladen, um diese Datei für Ihr ECAD Tool zu konvertieren. Weitere Infos zu ECAD-Modell.

Auf Lager: 477

Lagerbestand:
477 sofort lieferbar
Lieferzeit ab Hersteller:
71 Wochen Geschätzte Produktionszeit des Werks für Mengen, die größer als angezeigt sind.
Minimum: 1   Vielfache: 1
Stückpreis:
CHF -.--
Erw. Preis:
CHF -.--
Vorauss. Zolltarif:

Preis (CHF)

Menge Stückpreis
Erw. Preis
CHF 1.67 CHF 1.67
CHF 1.23 CHF 12.30
CHF 1.12 CHF 28.00
CHF 1.02 CHF 102.00
CHF 0.968 CHF 242.00
Ganzes Reel (Sie bestellen ein Vielfaches von 500)
CHF 0.896 CHF 448.00
CHF 0.857 CHF 857.00
CHF 0.833 CHF 2’082.50
CHF 0.817 CHF 4’085.00

Produktattribut Attributwert Attribut auswählen
Monolithic Power Systems (MPS)
Produktkategorie: Driver ICs LED-Beleuchtungstreiber
RoHS:  
1 Output
100 mA
QFN-14
5.5 V
1.8 V
1 MHz
5.5 V
MP3320N
- 40 C
+ 125 C
High Efficiency
Reel
Cut Tape
Marke: Monolithic Power Systems (MPS)
Eingangsspannung: 1.8 V to 5.5 V
Montageart: SMD/SMT
Anzahl der Kanäle: 3 Channel
Pd - Verlustleistung: 1.56 W
Produkt: Drivers
Produkt-Typ: LED Lighting Drivers
Verpackung ab Werk: 500
Unterkategorie: Driver ICs
Typ: RGB LED Driver
Produkte gefunden:
Um ähnliche Produkte anzuzeigen, wählen Sie mindestens ein Kontrollkästchen aus
Um ähnliche Produkte in dieser Kategorie anzuzeigen, wählen Sie mindestens ein Kontrollkästchen oben aus.
Ausgewählte Attribute: 0

Konformitätscodes
USHTS:
8542310030
TARIC:
8542399000
ECCN:
EAR99
Ursprungsklassifikationen
Ursprungsland:
China
Herstellungsland:
Nicht lieferbar
Land der Verbreitung:
Nicht lieferbar
Zum Zeitpunkt der Lieferung kann sich das Land ändern.

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.