Alle Ergebnisse (1’203)

Auswählen Bild Teile-Nr. Herst. Beschreibung Datenblatt Verfügbarkeit Preis (CHF) Ergebnisse in der Tabelle nach dem Einheitspreis bei Ihrer Menge filtern. Menge RoHS
Marki Microwave Signalaufbereitung The ADA-2052 can be used as a frequency extender to enhance the frequency range of a <26 GHz synthesizer up to 52 GHz. Useful for lab testing, test and measurement, and prototype systems.
3erwartet ab 25.02.2026
Min.: 1
Mult.: 1

Marki Microwave HF-Verstärker A broadband, efficient GaAs PHEMT distributed amplifier in a 4mm QFN surface mount package. It is designed to provide optimal LO drive for T3 mixers and offers 13 dB typical gain and 20 dBm typical saturated output power for 165 mA of current. 25Auf Lager
Min.: 1
Mult.: 1

Marki Microwave HF-Verstärker A high-linearity, high gain, low noise distributed amplifier capable of providing +22 dBm output power up to 30 GHz. When driven with an input power of 0 to +5 dBm, it can provide sufficient LO drive to power all H and most S diode mixers to 30GHz.
25erwartet ab 06.03.2026
Min.: 1
Mult.: 1

Marki Microwave HF-Verstärker A high-linearity, high gain, low noise distributed amplifier capable of providing +23 dBm output power up to 38 GHz. When driven with an input power of 0 to +5 dBm, it can provide sufficient LO drive to power all H and most S diode mixers to 40GHz.
25erwartet ab 06.03.2026
Min.: 1
Mult.: 1

Marki Microwave HF-Verstärker A high-linearity low noise amplifier capable of providing +20 dBm output power up to 10 GHz. The ADM-8095PSM can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
50erwartet ab 25.02.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The ADM1-0026PA is a complete LO driver solution for use with all Marki mixers up to 26.5 GHz. This single-stage packaged GaAs MMIC distributed amplifier integrates all required biasing circuitry.
5erwartet ab 13.03.2026
Min.: 1
Mult.: 1

Marki Microwave HF-Verstärker The ADM2-0035PA is an LO driver amplifier module with 2 internally connected wideband gain stages and equalization. It is designed to provide sufficient gain and output power for Marki S-diode mixers below 35 GHz with an input power of 0-5 dBm.
3erwartet ab 25.02.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung A broadband MMIC LO buffer amplifier that efficiently provides high gain and output power over a 20-55 GHz frequency band. It is designed to provide a strong, flat output power response when driven with an input power at 0 dBm.
3erwartet ab 25.02.2026
Min.: 1
Mult.: 1

Marki Microwave HF-Verstärker The APM-6849SM is a single stage broadband, low phase noise pre-amplifier designed to provide 11 dB typical gain packaged in a 3 mm QFN with low current consumption. 25Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The AQA-2156 is an amplified frequency multiplier that quadruples the 5.25 14 GHz input frequency, producing an amplified 21 - 56 GHz quadrupled output frequency.
3erwartet ab 13.03.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 3 GHz bandwidth.
5erwartet ab 13.03.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 3 GHz bandwidth. 10Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 6 GHz bandwidth.
10erwartet ab 25.02.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 6 GHz bandwidth.
40erwartet ab 25.02.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 9 GHz bandwidth.
30erwartet ab 25.02.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 10 MHz to 12 GHz bandwidth.
20erwartet ab 25.02.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 10 MHz to 20 GHz bandwidth.
20erwartet ab 25.02.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The BAL-0026 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 26.5 GHz bandwidth.
3erwartet ab 25.02.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The BAL-0032SSG is a surface-mount broadband balun, hand-tuned for optimal phase and amplitude balance over an industry leading 10 MHz to 32 GHz bandwidth.
20erwartet ab 25.02.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The BAL-0036 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 36 GHz bandwidth.
2erwartet ab 10.04.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The BAL-0067 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 67 GHz bandwidth.
2erwartet ab 25.02.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 3 GHz bandwidth.
20erwartet ab 25.02.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 6 GHz bandwidth.
7erwartet ab 25.02.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 6 GHz bandwidth.
20erwartet ab 25.02.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 6 GHz bandwidth.
25erwartet ab 10.04.2026
Min.: 1
Mult.: 1