Alle Ergebnisse (1’681)

Wählen Sie eine Kategorie unten, um die Filteroptionen zu sehen und Ihre Suche einzugrenzen.

Werkzeuge u. Verbrauchsmaterialien
Reihenfolge sortieren:
Kategorien nach Ergebnisanzahl sortiert.

Embedded Lösungen
Reihenfolge sortieren:
Kategorien nach Ergebnisanzahl sortiert.

Industrielle Automation
Reihenfolge sortieren:
Kategorien nach Ergebnisanzahl sortiert.

Passive Bauteile

Sensoren
Reihenfolge sortieren:
Kategorien nach Ergebnisanzahl sortiert.

Draht u. Kabel
Reihenfolge sortieren:
Kategorien nach Ergebnisanzahl sortiert.

Steckverbinder
Reihenfolge sortieren:
Kategorien nach Ergebnisanzahl sortiert.

Optoelektronik
Reihenfolge sortieren:
Kategorien nach Ergebnisanzahl sortiert.

Elektromechanik
Reihenfolge sortieren:
Kategorien nach Ergebnisanzahl sortiert.

Halbleiter
Reihenfolge sortieren:
Kategorien nach Ergebnisanzahl sortiert.

Gehäuse

Leistung

Prüfen & Messen
Reihenfolge sortieren:
Kategorien nach Ergebnisanzahl sortiert.

Kühlung

Nicht klassifiziert

Auswählen Bild Teile-Nr.
 Herst.
Beschreibung Datenblatt Verfügbarkeit Preis (CHF) Ergebnisse in der Tabelle nach dem Einheitspreis bei Ihrer Menge filtern.
Menge RoHS
SparkFun GPS-24114
SparkFun Antennen The SparkFun GNSS L1/L5 Breakout - NEO-F10N SMA is a standard precision GNSS board with meter-level positional accuracy. The NEO-F10N uses the L1/L5 bands instead of the more commonly seen L1/L2 bands. Utilizing the L5 band the NEO-F10N delivers im 27Auf Lager
Min.: 1
Mult.: 1
SparkFun GPS-25795
SparkFun Antennen The SparkFun telescoping pole is perfect for GNSS projects that require mobility and ease of use. Get your point heights dialed in to the millimeter! This lightweight carbon fiber pole weighs less than 2.1 lbs (1.0kg) and can be extended from 1.3 to 3Auf Lager
Min.: 1
Mult.: 1
SparkFun Schnittstellen-Entwicklungstools With this USB-C breakout you will be able to incorporate a vertical USB-C connector into your projects without needing to solder each tiny SMD pad. The vertical orientation of the USB-C connector also makes it convenient for panel mounts in projects 133Auf Lager
100erwartet ab 13.08.2026
Min.: 1
Mult.: 1
SparkFun USB-Kabel/IEEE 1394-Kabel You've got the wrong USB cable. It doesn't matter which one you have it's the wrong one. But what if you could have the right one? What if you could have the right one every time? Enter: The SparkFun 4-in-1 Multi-USB Cable. The SparkFun 4-in-1 Multi
9Auf Lager
Min.: 1
Mult.: 1
SparkFun USB-Kabel/IEEE 1394-Kabel You've got the wrong USB cable. It doesn't matter which one you have it's the wrong one. But what if you could have the right one? What if you could have the right one every time? Enter: The SparkFun 4-in-1 Multi-USB Cable. The SparkFun 4-in-1 Multi
16Auf Lager
Min.: 1
Mult.: 1

SparkFun RF-Leitungssätze When experimenting with GPS or RF it can be very handy to have the antenna on the top of your house or outside with a clear view of the sky while you stay in doors and warm at your keyboard. This 10m (33') SMA extension does a great job of connecting 43Auf Lager
Min.: 1
Mult.: 1
SparkFun RF-Leitungssätze This is a 300mm (1 foot) Male TNC to Male SMA cable with injection molded stress-relief boots. This is an excellent cable for connecting one of our RTK development boards to a high quality 'UFO' style GNSS antenna. Able to withstand harsh environment 13Auf Lager
Min.: 1
Mult.: 1
SparkFun RF-Leitungssätze This is a 10 meter (33 ft) long Male TNC to Male SMA cable with injection molded stress-relief boots. This is an excellent cable for connecting one of our RTK development boards to a high quality 'UFO' style GNSS antenna. It's long enough to connect 8Auf Lager
4Auf Bestellung
Min.: 1
Mult.: 1
SparkFun RF-Leitungssätze This is a basic RP-SMA (Reverse Polarity Sub-Miniature A) male to female connector cable. Each cable is 1M (39.3in.) long with RG174 housing. The RP-SMA connectors at each end are small enough for most consumer GPS cellular and other RF application 43Auf Lager
55erwartet ab 07.08.2026
Min.: 1
Mult.: 1
SparkFun USB-Kabel/IEEE 1394-Kabel This is a USB-C to USB-C power charging cable. It comes with a flexible tangle free silicone coating. Coming in at 3m (9.84') giving you plenty of length to work on your project without needing to be right next to the power source.This cable support
Datenblatt
15Auf Lager
Min.: 1
Mult.: 1
SparkFun IC-Entwicklungstools für Energieverwaltung The SparkFun 5V Buck Regulator Breakout features the AP63357 from Diodes Inc. a 3.5A synchronous buck converter with a wide input voltage range of 3.8V to 32V. The fully integrated 74mΩ high-side power MOSFET/40mΩ low-side power MOSFET provi 65Auf Lager
Min.: 1
Mult.: 1

SparkFun IC-Entwicklungstools für Energieverwaltung The SparkFun 5V BabyBuck Regulator Breakout features the AP63357 from Diodes Inc. a 3.5A synchronous buck converter with a wide input voltage range of 3.8V to 32V. The fully integrated 74mΩ high-side power MOSFET/40mΩ low-side power MOSFET p 101Auf Lager
Min.: 1
Mult.: 1

SparkFun IC-Entwicklungstools für Energieverwaltung The SparkFun 1.8V Buck Regulator Breakout features the AP3429A from Diodes Inc. a 2A step-down DC-DC converter with an input voltage range of 2.7V to 5.5V. This full-size 1in. x 1in. version of our buck regulator boards is configured to provide a r 27Auf Lager
Min.: 1
Mult.: 1

SparkFun Entwicklungsboards und Kits - Andere Prozessoren The MicroMod Main Board - Single is a specialized carrier board that allows you to interface a MicroMod Processor Board with a single MicroMod Function Board. With the M.2 MicroMod connector connecting your Processor and Function Boards is a breeze. 17Auf Lager
Min.: 1
Mult.: 1

SparkFun Schnittstellen-Entwicklungstools The SparkFun USB-C Host Shield contains all of the digital logic and analog circuitry necessary to implement a USB peripheral/host controller with your Arduino. This means you could use your Arduino to interface with and control any USB 2.0 compatibl 3Auf Lager
Min.: 1
Mult.: 1
SparkFun Entwicklungstools für multifunktionale Sensoren The SparkFun MicroMod STM32 Processor Board is ready to rock your MicroMod world with its ARM Cortex -M4 32-bit RISC core! This little Processor Board provides you with an economical and easy to use development platform if you're needing more powe 9Auf Lager
Min.: 1
Mult.: 1

SparkFun IC-Entwicklungstools für Energieverwaltung The MyoWare® 2.0 Power Shield is designed to easily power the MyoWare 2.0 Muscle Sensor for remote applications. The MyoWare Power Shield is equipped with snap connectors on the board so you can easily stack it to the top side of the MyoWare Musc 10Auf Lager
Min.: 1
Mult.: 1
SparkFun Entwicklungstools für multifunktionale Sensoren Capture complex environmental movement and location data without writing a single line of code! The SparkFun DataLogger IoT is a powerful preprogrammed data logger designed for users who need to capture a lot of data quickly and get back to their 6Auf Lager
Min.: 1
Mult.: 1
SparkFun Multiprotokoll-Development Tools Don't be fooled by its miniature size; the SparkFun Pro Micro ESP32-C3 packs a punch. This micro marvel crams the powerful ESP32-C3 a single-core RISC-V powerhouse with 400KB of SRAM into a compact 1.3in. x 0.7in. board. Clocking in at 160MHz it's 20Auf Lager
Min.: 1
Mult.: 1
SparkFun OLED-Displays & Zubehör The SparkFun Qwiic OLED Display can display up to four lines of text and features 128x32 pixels in a compact 0.91-inch display. (diagonal) frame. As an OLED this display does not have a backlight layer (unlike LCDs); therefore it s thinner consu 104Auf Lager
Min.: 1
Mult.: 1

SparkFun Motor / Bewegung / Zündungscontroller und Treiber A 3-phase DC brushless DC motor has the unique capability of being both a high efficiency high torque very smooth motor as well as the starting point for haptic feedback when combined with the appropriate sensor and motor control. For an excellent 22Auf Lager
Min.: 1
Mult.: 1

SparkFun IC-Entwicklungstools für Energieverwaltung The SparkFun 3-Phase Brushless Motor Driver featuring the TMC6300 from ADI + Trinamic is a powerful and easy-to-use three-phase motor driver that was designed to control our Brushless Gimbal Motor. It can be used to control any 3-phase BLDC or PMSM 45Auf Lager
Min.: 1
Mult.: 1

SparkFun IC-Entwicklungstools für Energieverwaltung The SparkFun IoT Brushless Motor Driver is a powerful easy-to-use motor driver that can control any 3-phase BLDC with built-in WiFi and Bluetooth capabilities! However with our on-board Three Phase Brushless Gimbal Motor you can be sure of getti 5Auf Lager
Min.: 1
Mult.: 1
SparkFun Entwicklungstools für Beschleunigungssensoren The SparkFun Qwiic ISM330DHCX Six Degrees of Freedom IMU is a standard-sized 1in. by 1in. breakout featuring STMicroelectronics' ISM330DHCX; a high-performance 3D digital accelerometer and 3D digital gyroscope tailored for Industry 4.0. Applications 25Auf Lager
22Auf Bestellung
Min.: 1
Mult.: 1
SparkFun Entwicklungstools für Magnetik-Sensoren The SparkFun Qwiic Micro MMC5983MA Magnetometer is a micro-sized 0.75in. by 0.30in. sensor that utilizes the highly sensitive triple-axis magnetometer by MEMSIC. We've attached the magnetometer IC onto an incredibly small Qwiic board form factor tha 18Auf Lager
39Auf Bestellung
Min.: 1
Mult.: 1