TR Series Pressure Transducer

Merit Sensor TR Series Pressure Transducer is a fully compensated, amplified output pressure sensor package that combines Merit Sensor's Sentium process harsh media MEMS piezoresistive die with state-of-the-art pressure sensor ASIC signal management. The TR Series' plug and play design isolates onboard electronics from system media through an inert eutectic alloy solder bond of the MEMS pressure element to a ceramic PCB substrate. Direct media pressure sensing translates into excellent system design flexibility leading to lower cost and ease of manufacture. Merit Sensor's TR Series Pressure Transducer is designed for air, liquid, and gas harsh media compatibility over a broad temperature range from -40ºC (-40ºF) to 150ºC (300ºF) with a total error band of less than 1.0%. The design includes a 4.7kΩ circuit protection pull-up resistor, operates on a single 5.0VDC supply, and requires no external components for proper operation. Both gage and absolute pressure reference designs up to 500psi (35.5 bar) operating range are available.

Ergebnisse: 30
Auswählen Bild Teile-Nr.
 Herst.
Beschreibung Datenblatt Verfügbarkeit Preis (CHF) Ergebnisse in der Tabelle nach dem Einheitspreis bei Ihrer Menge filtern.
Menge RoHS ECAD Model Art des Drucks
Betriebsdruck
Präzision
Art der Ausgabe
Montageart
Betriebsversorgungsspannung
Minimale Betriebstemperatur
Maximale Betriebstemperatur
Qualifikation
Serie
Verpackung
Merit Sensor Drucksensoren für Plattenmontage Designed for harsh media and high temperature, 500 psia, radial seal, analog out 0.5-4.5 V, +/-2.5% accuracy
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 8 Wochen
Min.: 1
Mult.: 1
Rolle: 250

Absolute 500 psi 2.5 % Analog SMD/SMT 5 V - 40 C + 150 C AEC-Q100 TR Reel, Cut Tape
Merit Sensor Drucksensoren für Plattenmontage Designed for harsh media and high temperature, 500 psia, radial seal, straight pins, analog out 0.5-4.5 V, +/-2.5% accuracy
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 8 Wochen
Min.: 50
Mult.: 50

Absolute 500 psi 2.5 % Analog Through Hole 5 V - 40 C + 150 C AEC-Q100 TR Tray
Merit Sensor Drucksensoren für Plattenmontage Designed for harsh media and high temperature, 500 psig, face seal, analog out 0.5-4.5 V, +/-2.5% accuracy
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 8 Wochen
Min.: 50
Mult.: 50
Rolle: 250

Gauge 500 psi 2.5 % Analog SMD/SMT 5 V - 40 C + 150 C AEC-Q100 TR Reel, Cut Tape
Merit Sensor Drucksensoren für Plattenmontage Designed for harsh media and high temperature, 500 psig, radial seal, analog out 0.5-4.5 V, +/-2.5% accuracy
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 8 Wochen
Min.: 50
Mult.: 50
Rolle: 250

Gauge 500 psi 2.5 % Analog SMD/SMT 5 V - 40 C + 150 C AEC-Q100 TR Reel, Cut Tape
Merit Sensor Drucksensoren für Plattenmontage Designed for harsh media and high temperature, 500 psig, radial seal, straight pins, analog out 0.5-4.5 V, +/-2.5% accuracy
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 8 Wochen
Min.: 50
Mult.: 50

Gauge 500 psi 2.5 % Analog Through Hole 5 V - 40 C + 150 C AEC-Q100 TR Tray