MAX25601EVKIT#

Analog Devices / Maxim Integrated
700-MAX25601EVKIT#
MAX25601EVKIT#

Herst.:

Beschreibung:
Entwicklungstools für LED-Leuchten Evaluation kit for Synchronous Boost wit

Verfügbarkeit

Lagerbestand:
14 Kann in 20 Tagen versandt werden
Minimum: 1   Vielfache: 1
Stückpreis:
CHF -.--
Erw. Preis:
CHF -.--
Vorauss. Zolltarif:
Dieses Produkt wird KOSTENLOS versandt

Preis (CHF)

Menge Stückpreis
Erw. Preis
CHF 210.64 CHF 210.64

Produktattribut Attributwert Attribut auswählen
Analog Devices Inc.
Produktkategorie: Entwicklungstools für LED-Leuchten
RoHS:  
Evaluation Kits
12 V
MAX25601
Bulk
Marke: Analog Devices / Maxim Integrated
Produkt-Typ: LED Lighting Development Tools
Verpackung ab Werk: 1
Unterkategorie: Development Tools
Produkte gefunden:
Um ähnliche Produkte anzuzeigen, wählen Sie mindestens ein Kontrollkästchen aus
Um ähnliche Produkte in dieser Kategorie anzuzeigen, wählen Sie mindestens ein Kontrollkästchen oben aus.
Ausgewählte Attribute: 0

CAHTS:
8473302000
USHTS:
8473301180
MXHTS:
8473300401
ECCN:
EAR99

31FL323x LED Lighting Development Boards

ISSI 31FL323x LED Lighting Development Boards are development tools that evaluate ISSI multi-channel LED drivers. LED drivers are electrical circuits used to power light-emitting diodes. The fully assembled and tested board is powered by the Arm® Cortex®-M3 or 80C51 (IS31FL3235A-QFLS2-EB) with a 5V operating supply voltage. The evaluation boards have multiple display modes.

IS31LT3360 Demonstration Board

ISSI IS31LT3360 Demonstration Board is a fully assembled and tested PCB that uses the IS31LT3360 continuous mode inductive step-down converter. This ISSI board is designed to drive single or multiple series connected LEDs. This performance is achieved efficiently from a voltage source higher than the LED voltage.

MAX25601EVKIT Controller-Evaluierungskit

Das Maxim MAX25601EVKIT Controller-Evaluierungskit bietet ein bewährtes Design für die Evaluierung des Automotive-HB-LED-Boost-Buck Controllers (High Brightness LED, HB-LED) mit hoher Spannung. Der Frontend-Vor-Boost wird mit einer DC-Versorgungsspannung von 7,7 V bis 18 V betrieben und erzeugt einen Ausgang von 48 V. Der Buck unterstützt höchstens 12 x LEDs und liefert bis zu 1,5 A zu einer Kette von LEDs. Die Gesamtspannung der Kette kann von 3 V bis 36 V variieren.