Alle Ergebnisse (377)

Wählen Sie eine Kategorie unten, um die Filteroptionen zu sehen und Ihre Suche einzugrenzen.
Auswählen Bild Teile-Nr.
 Herst.
Beschreibung Datenblatt Verfügbarkeit Preis (CHF) Ergebnisse in der Tabelle nach dem Einheitspreis bei Ihrer Menge filtern.
Menge RoHS
Marki Microwave Signalaufbereitung This equalizer provides 7.8 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 10 dB and a 50-ohm match maintained over the entire operating range.
Datenblatt
1Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung MMIQ-0218L is a low LO drive, passive GaAs MMIC IQ mixer that operates across a 9:1 bandwidth. This is an ultra-broadband mixer spanning 2 to 18GHz on the RF and LO ports with an IF from DC to 3 GHz.
Datenblatt
3Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung 2-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications.
Datenblatt
3Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The T3-18G is a high performance mixer featuring LO/RF from 10 MHz to 18 GHz and IF from 1 MHz to 10 GHz.
Datenblatt
2Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The BAL-0067 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 67 GHz bandwidth.
Datenblatt
1Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The T3-20G is a high performance mixer featuring LO/RF from 10 MHz to 20 GHz and IF from 1 MHz to 10 GHz.
Datenblatt
2Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung MMIQ-0520L is a low LO drive, passive GaAs MMIC IQ mixer that operates down to an unrivaled +3 dBm LO drive level. This is an ultra-broadband mixer spanning 5 to 20GHz on the RF and LO ports with an IF from DC to 6 GHz.
Datenblatt
2Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The T3-07 is a high performance mixer featuring LO/RF from 1 MHz to 7 GHz and IF from 1 MHz to 4 GHz.
Datenblatt
3Auf Lager
Min.: 1
Mult.: 1

Marki Microwave RF-Adapter - Abgang The BTN2-0026 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.
Datenblatt
1Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MM1-0312H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor.
Datenblatt
2Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung MM1-0212L is a low power GaAs MMIC double balanced mixer that operates at LO powers as a low as +1 dBm. MM1-0212L is a low frequency, low power S band mixer that works well as both an up and down converter to through X band.
Datenblatt
1Auf Lager
2erwartet ab 10.07.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung MM1-1044H is a GaAs MMIC double balanced mixer that is designed for and operates at the K and Ka band 5G frequencies. MM1-1044H is a high linearity Ka band mixer that works well as both an up and down converter.
Datenblatt
1Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The ADM1-0026PA is a complete LO driver solution for use with all Marki mixers up to 26.5 GHz. This single-stage packaged GaAs MMIC distributed amplifier integrates all required biasing circuitry.
Datenblatt
1Auf Lager
1erwartet ab 25.09.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The C20-0R520 is a broadband 0.5-20 GHz, 20 dB directional coupler. The multisection tri-plate stripline design exhibits excellent coupling flatness and VSWR at all ports.
Datenblatt
1Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The HLM-40ABH is a wide bandwidth GaAs Schottky diode signal limiter featuring high IP3 and medium power handling. It offers low insertion loss and low return loss from DC through Ka band and has a typical 1dB compression point of 9dBm.
Datenblatt
2Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The ADA-2052 can be used as a frequency extender to enhance the frequency range of a <26 GHz synthesizer up to 52 GHz. Useful for lab testing, test and measurement, and prototype systems.
Datenblatt
1Auf Lager
Min.: 1
Mult.: 1

Marki Microwave HF-Verstärker The ADM2-0035PA is an LO driver amplifier module with 2 internally connected wideband gain stages and equalization. It is designed to provide sufficient gain and output power for Marki S-diode mixers below 35 GHz with an input power of 0-5 dBm.
Datenblatt
3Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung A broadband MMIC LO buffer amplifier that efficiently provides high gain and output power over a 20-55 GHz frequency band. It is designed to provide a strong, flat output power response when driven with an input power at 0 dBm.
Datenblatt
3Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The AQA-2156 is an amplified frequency multiplier that quadruples the 5.25 14 GHz input frequency, producing an amplified 21 - 56 GHz quadrupled output frequency.
Datenblatt
3Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The BAL-0036 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 36 GHz bandwidth.
Datenblatt
1Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The BT-0040 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.
Datenblatt
2Auf Lager
Min.: 1
Mult.: 1

Marki Microwave RF-Adapter - Abgang The BTN-0050 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.
Datenblatt
5Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung A high power type N-connectorized bidirectional coupler capable of operation to 18 GHz. This coupler features a unique air-line construction that simultaneously enables extremely low loss and high directivity.
Datenblatt
3Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The CBR17-0026 offers the broadest bandwidth of any standalone bridge coupler on the market. It provides an extremely high degree of measurement accuracy for forward power measurements, and can also be used to measure VSWR/return loss.
Datenblatt
3Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung MM1-0222L is a GaAs MMIC double balanced mixer that features excellent conversion loss, superior isolations, and spurious performance across a broad bandwidth. The MM1 0222L works well as both an up and down converter through the Ku band and beyond.
Datenblatt
10Auf Lager
Min.: 1
Mult.: 1