|
|
Sensor-Kleinteile u. Zubehör WORLD-BEAM QS18 Series: 6 Beam Sensor Array; Diffuse; Range: 200 mm; Input: 10-30 V dc; Outputs: Bipolar NPN and PNP Light Operate; 150 mm (6 in) 4-pin M12 Pigtail QD
- SAB-497AB1DS6-Q5E
- Banner Engineering
-
1:
CHF 591.52
-
2Auf Lager
|
Mouser-Teilenr.
778-SAB-497AB1DS6Q5E
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör WORLD-BEAM QS18 Series: 6 Beam Sensor Array; Diffuse; Range: 200 mm; Input: 10-30 V dc; Outputs: Bipolar NPN and PNP Light Operate; 150 mm (6 in) 4-pin M12 Pigtail QD
|
|
2Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör L1 A3 FULLY ASSY MULTIBEAM
- L1A3
- Banner Engineering
-
1:
CHF 601.83
-
2Auf Lager
|
Mouser-Teilenr.
778-L1A3
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör L1 A3 FULLY ASSY MULTIBEAM
|
|
2Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Laser Alignment Tool: Class 2 Laser; Visible Red; Mounting Clips Included for EZ-SCREEN 14/30, LS, LP, Type 2; SGS and S4B
- LAT-1
- Banner Engineering
-
1:
CHF 455.14
-
8Auf Lager
|
Mouser-Teilenr.
778-LAT-1
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Laser Alignment Tool: Class 2 Laser; Visible Red; Mounting Clips Included for EZ-SCREEN 14/30, LS, LP, Type 2; SGS and S4B
|
|
8Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör MULTI-BEAM: 3/4-Wire Scanner Block - Convergent; Focal Point: 38 mm; Input: depends on power block; Output: depends on power block; Interconnecting Pins
- SBC1
- Banner Engineering
-
1:
CHF 323.54
-
4Auf Lager Beschränkte Verfügbarkeit
|
Mouser-Teilenr.
778-SBC1
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör MULTI-BEAM: 3/4-Wire Scanner Block - Convergent; Focal Point: 38 mm; Input: depends on power block; Output: depends on power block; Interconnecting Pins
|
|
4Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör MULTI-BEAM: 3/4-Wire Scanner Block - Retro; Range: 2.5cm-22 m; Input: depends on power block; Output: depends on the power block; Interconnecting Pins
- SBL1
- Banner Engineering
-
1:
CHF 249.77
-
12Auf Lager Beschränkte Verfügbarkeit
|
Mouser-Teilenr.
778-SBL1
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör MULTI-BEAM: 3/4-Wire Scanner Block - Retro; Range: 2.5cm-22 m; Input: depends on power block; Output: depends on the power block; Interconnecting Pins
|
|
12Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Reflective Tape; 3 x 600 in; Max Temp = 60 degree C; 50 ft Long
- BRT-THG-3-600
- Banner Engineering
-
1:
CHF 657.33
-
4Auf Lager
|
Mouser-Teilenr.
778-BRT-THG-3-600
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Reflective Tape; 3 x 600 in; Max Temp = 60 degree C; 50 ft Long
|
|
4Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Montagekleinteile Replacement 30 mm Plastic Locknut 25 pack
- LN30MM-25
- Banner Engineering
-
1:
CHF 21.41
-
15Auf Lager
|
Mouser-Teilenr.
778-LN30MM-25
|
Banner Engineering
|
Montagekleinteile Replacement 30 mm Plastic Locknut 25 pack
|
|
15Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Montagekleinteile Bracket: Mounts by its base; Material: Black VALOX; Flexible and Convienient; Hardware included
- SMB18SM
- Banner Engineering
-
1:
CHF 12.69
-
1Auf Lager
|
Mouser-Teilenr.
778-SMB18SM
|
Banner Engineering
|
Montagekleinteile Bracket: Mounts by its base; Material: Black VALOX; Flexible and Convienient; Hardware included
|
|
1Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
LED-Montage-Zubehör SMBAMS22P AUTOMOTIVE BRACKET, SMBAMS22P, P/N 147094, CRS ZINC, 22MM HOLE, FLAT PLATE
- SMBAMS22P
- Banner Engineering
-
1:
CHF 15.86
-
4Auf Lager
|
Mouser-Teilenr.
778-SMBAMS22P
|
Banner Engineering
|
LED-Montage-Zubehör SMBAMS22P AUTOMOTIVE BRACKET, SMBAMS22P, P/N 147094, CRS ZINC, 22MM HOLE, FLAT PLATE
|
|
4Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
LED-Montage-Zubehör Bracket: Automotive; CRS Zinc; 2 x 22 mm hole; Right-Angle
- SMBAMS22RA2
- Banner Engineering
-
1:
CHF 28.55
-
1Auf Lager
|
Mouser-Teilenr.
778-SMBAMS22RA2
|
Banner Engineering
|
LED-Montage-Zubehör Bracket: Automotive; CRS Zinc; 2 x 22 mm hole; Right-Angle
|
|
1Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Montagekleinteile Flexible arm mounting clamp; 2X 1/4-20 W/1.375 spacing; Black Painted Steel
- SMBFLXCLAMPD
- Banner Engineering
-
1:
CHF 22.99
-
4Auf Lager
|
Mouser-Teilenr.
778-SMBFLXCLAMPD
|
Banner Engineering
|
Montagekleinteile Flexible arm mounting clamp; 2X 1/4-20 W/1.375 spacing; Black Painted Steel
|
|
4Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Bracket: with Flush Mount Frame; One Axis +/- 20 Degree Adjustment; 12 Gauge Stainless Steel; Used with Q240
- SMBQ240SS1
- Banner Engineering
-
1:
CHF 189.51
-
3Auf Lager
|
Mouser-Teilenr.
778-SMBQ240SS1
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Bracket: with Flush Mount Frame; One Axis +/- 20 Degree Adjustment; 12 Gauge Stainless Steel; Used with Q240
|
|
3Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Bracket for Mounting R90; R90 Right-Angle; M4 x 0.7 mm; Stainless Steel
- SMBR90RA
- Banner Engineering
-
1:
CHF 16.65
-
1Auf Lager
|
Mouser-Teilenr.
778-SMBR90RA
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Bracket for Mounting R90; R90 Right-Angle; M4 x 0.7 mm; Stainless Steel
|
|
1Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Bracket: for DX80 or Q45 to K50U-RA
- BWA-BK-004
- Banner Engineering
-
1:
CHF 32.51
-
9Auf Lager
|
Mouser-Teilenr.
778-BWA-BK-004
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Bracket: for DX80 or Q45 to K50U-RA
|
|
9Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Accessory: EG24 Reflector Arm with Reflector
- ACC-EG24-REFLECTOR ARM
- Banner Engineering
-
1:
CHF 19.82
-
1Auf Lager
-
Neu bei Mouser
|
Mouser-Teilenr.
778-EG24REFLECTORARM
Neu bei Mouser
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Accessory: EG24 Reflector Arm with Reflector
|
|
1Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Schalterkleinteile iVu Window spare parts kit; includes window, locking clip, screw; and O-ring
- IVUW
- Banner Engineering
-
1:
CHF 18.24
-
4Auf Lager
|
Mouser-Teilenr.
778-IVUW
|
Banner Engineering
|
Schalterkleinteile iVu Window spare parts kit; includes window, locking clip, screw; and O-ring
|
|
4Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Bracket: For Use with HLS27; Impact Absorbing; Set of Two Brackets; 300 Series Stainless Steel; Designed for M5 or No. 10 Mounting Hardware
- LMBHLS27S
- Banner Engineering
-
1:
CHF 15.07
-
2Auf Lager
|
Mouser-Teilenr.
778-LMBHLS27S
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Bracket: For Use with HLS27; Impact Absorbing; Set of Two Brackets; 300 Series Stainless Steel; Designed for M5 or No. 10 Mounting Hardware
|
|
2Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
LED-Montage-Zubehör Bracket: For Use with WLB92; Hanging Kit; 1.5 m (5 ft) Cable with Looped End; Galvanized Steel; Packaged Two per Kit (Hardware Included)
- LMBWLB92HK5
- Banner Engineering
-
1:
CHF 40.44
-
5Auf Lager
|
Mouser-Teilenr.
778-LMBWLB92HK5
|
Banner Engineering
|
LED-Montage-Zubehör Bracket: For Use with WLB92; Hanging Kit; 1.5 m (5 ft) Cable with Looped End; Galvanized Steel; Packaged Two per Kit (Hardware Included)
|
|
5Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
LED-Montage-Zubehör Bracket: For Use with WLC60; Back Plate for 340 mm Model; 300 Series Stainless Steel (Hardware Included)
- LMBWLC60B340
- Banner Engineering
-
1:
CHF 45.20
-
1Auf Lager
|
Mouser-Teilenr.
778-LMBWLC60B340
|
Banner Engineering
|
LED-Montage-Zubehör Bracket: For Use with WLC60; Back Plate for 340 mm Model; 300 Series Stainless Steel (Hardware Included)
|
|
1Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
LED-Montage-Zubehör Bracket: For Use with WLS28; 180 Degree Rotation; Set of Two Snap Brackets; 300 Series Stainless Steel
- LMBWLS28-180S
- Banner Engineering
-
1:
CHF 26.17
-
1Auf Lager
|
Mouser-Teilenr.
778-LMBWLS28-180S
|
Banner Engineering
|
LED-Montage-Zubehör Bracket: For Use with WLS28; 180 Degree Rotation; Set of Two Snap Brackets; 300 Series Stainless Steel
|
|
1Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Stands for Mirrors & Sensors; Brackets Outward: Length 100-600 mm (4-24 in); Stand Height: 1050 mm (42 in); Includes: Base Pole and Hardware for attachment
- MSA-S42-1
- Banner Engineering
-
1:
CHF 569.32
-
1Auf Lager
|
Mouser-Teilenr.
778-MSA-S42-1
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Stands for Mirrors & Sensors; Brackets Outward: Length 100-600 mm (4-24 in); Stand Height: 1050 mm (42 in); Includes: Base Pole and Hardware for attachment
|
|
1Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör OPTO-TOUCH: Green Field Cover; Prevents unwanted activation of OPTO-TOUCH button; Material: Polypropylene Copolymer; Capable of absorbing high impacts
- OTC-1-GN
- Banner Engineering
-
1:
CHF 16.65
-
1Auf Lager
|
Mouser-Teilenr.
778-OTC-1-GN
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör OPTO-TOUCH: Green Field Cover; Prevents unwanted activation of OPTO-TOUCH button; Material: Polypropylene Copolymer; Capable of absorbing high impacts
|
|
1Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör MULTI-BEAM: 3/4-Wire Scanner Block - Emitter; Range: 30 m; Input: depends on power block; Output: depends on power block; Interconnecting Pins
- SBEV
- Banner Engineering
-
1:
CHF 218.05
-
5Auf Lager Beschränkte Verfügbarkeit
|
Mouser-Teilenr.
778-SBEV
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör MULTI-BEAM: 3/4-Wire Scanner Block - Emitter; Range: 30 m; Input: depends on power block; Output: depends on power block; Interconnecting Pins
|
|
5Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Bracket: One-piece bracket for mounting to 28 mm diamiter pipe; Black-painted steel; Requires SMBPVA..C for mounting at an angle +/- 90 deg
- SMBPVA7
- Banner Engineering
-
1:
CHF 38.85
-
5Auf Lager
|
Mouser-Teilenr.
778-SMBPVA7
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Bracket: One-piece bracket for mounting to 28 mm diamiter pipe; Black-painted steel; Requires SMBPVA..C for mounting at an angle +/- 90 deg
|
|
5Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor-Kleinteile u. Zubehör Bracket kit for sensor array bar; Material: 12 Gauge cold rolled steel; #8-32 /M4 mounting holes located under array bar; M3 hardware to attach to array end cap included
- SMBSAB-IN
- Banner Engineering
-
1:
CHF 10.31
-
9Auf Lager
|
Mouser-Teilenr.
778-SMBSAB-IN
|
Banner Engineering
|
Sensor-Kleinteile u. Zubehör Bracket kit for sensor array bar; Material: 12 Gauge cold rolled steel; #8-32 /M4 mounting holes located under array bar; M3 hardware to attach to array end cap included
|
|
9Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
Liechtenstein
