LI-USB30-CSLINK-IPX-TESTER

Leopard Imaging
931-LI-USB30-CSLIN
LI-USB30-CSLINK-IPX-TESTER

Herst.:

Beschreibung:
Schnittstellenmodule (Default Firmware)

Lebenszyklus:
Neues Produkt:
Neu von diesem Hersteller.
ECAD Model:
Den kostenlosen Library Loader herunterladen, um diese Datei für Ihr ECAD Tool zu konvertieren. Weitere Infos zu ECAD-Modell.

Verfügbarkeit

Lagerbestand:
Nicht auf Lager
Lieferzeit ab Hersteller:
3 Wochen Geschätzte Produktionszeit des Werks.
Minimum: 1   Vielfache: 1
Stückpreis:
CHF -.--
Erw. Preis:
CHF -.--
Vorauss. Zolltarif:
Dieses Produkt wird KOSTENLOS versandt

Preis (CHF)

Menge Stückpreis
Erw. Preis
CHF 283.34 CHF 283.34

Produktattribut Attributwert Attribut auswählen
Leopard Imaging
Produktkategorie: Schnittstellenmodule
Converters
MIPI-CSI-2 to Parallel
2 Port
Micro USB 3.0, MIPI-CSI-2
5 V
5 V
Marke: Leopard Imaging
Abmessungen: 36.5 mm x 26.5 mm x 18.7 mm
Produkt-Typ: Interface Modules
Verpackung ab Werk: 1
Unterkategorie: Embedded Solutions
Produkte gefunden:
Um ähnliche Produkte anzuzeigen, wählen Sie mindestens ein Kontrollkästchen aus
Um ähnliche Produkte in dieser Kategorie anzuzeigen, wählen Sie mindestens ein Kontrollkästchen oben aus.
Ausgewählte Attribute: 0

                        
Product will have default firmware unless specified. Please
review the following conditions if applicable to your products
firmware.

For USB3.0 and USB2.0 cameras, the supplier will need to flash
the firmware and/or FPGA binary.

Cameras with built-in ISP (except for the AR0234-YUV), the
supplier will need to flash the ISP binary to camera.
For all the MIPI adapters with FPGA for Jetson, supplier will
need to flash the FPGA binary.

For all the Jetson boxes or carrier board with SOM, supplier
will need to flash the OS image and install the driver.

Please contact a Mouser Technical Support Representative for
further assistance.

5-0725-1

USHTS:
8525894000

EMPFOHLENE PRODUKTE
LEOPARD IMAGING