Qwiic-Verbindungssystem

Das Qwiic-Verbindungssystem von SparkFun ist ein Ökosystem aus I2C-Sensoren, Aktoren, Shields und Kabeln, das für ein schnelleres und weniger fehleranfälliges Prototyping sorgt. Das Qwiic-Verbindungssystem verwendet das Inter-integrierte Schaltkreis-Protokoll (I2C). Das I2C-Protokoll ist dafür vorgesehen, mehreren integrierten digitalen Schaltkreisen, die als Slave fungieren, die Kommunikation mit einem oder mehreren Master-Chips über nur zwei Drähte zu ermöglichen. 

Ergebnisse: 16
Auswählen Bild Teile-Nr.
 Herst.
Beschreibung Datenblatt Verfügbarkeit Preis (CHF) Ergebnisse in der Tabelle nach dem Einheitspreis bei Ihrer Menge filtern.
Menge RoHS ECAD Model Produkt
Typ
SparkFun SparkFun Zubehör Qwiic JST Connector- SMD 4-pin
Datenblatt
2’605Auf Lager
4’000erwartet ab 07.07.2026
MouseReel verfügbar
Min.: 1
Mult.: 1
: 1’000

Connectors Tiny 4-Pin SMD Connector
SparkFun SparkFun Zubehör The SparkFun Qwiic Connect System is constantly growing in popularity with makers. So to make it even easier to get started we've assembled this Qwiic Cable Kit for everyone. If you aren't sure which Qwiic cable to use this handy box includes all o
Datenblatt
228Auf Lager
Min.: 1
Mult.: 1
Nein
Cables Qwiic Cable Kit
SparkFun SparkFun Zubehör The SparkFun Qwiic MicroPressure Sensor is a miniature breakout equipped with Honeywell's 25psi piezoresistive silicon pressure sensor. This MicroPressure Sensor offers a calibrated and compensated pressure sensing range of 60mbar to 2.5bar easy to
Datenblatt
55Auf Lager
Min.: 1
Mult.: 1
Nein
Sensors
SparkFun SparkFun Zubehör Buttons are an easy and tactile way to interface with your project but why would you want to deal with debouncing polling and wiring up pull-up resistors? The Qwiic Button with built-in red LED simplifies all of those nasty worries away into an ea
Datenblatt
25Auf Lager
Min.: 1
Mult.: 1
Optoelectronics Red LED
SparkFun SparkFun Zubehör Buttons are an easy and tactile way to interface with your project but why would you want to deal with debouncing polling and wiring up pull-up resistors? The Qwiic Button with built-in green LED simplifies all of those nasty worries away into an
Datenblatt
24Auf Lager
Min.: 1
Mult.: 1

Qwiic Button with Green LEDs
SparkFun SparkFun Zubehör SparkFun Qwiic Shield for Arduino 29Auf Lager
Min.: 1
Mult.: 1

Shields Qwiic Connect System
SparkFun SparkFun Zubehör The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic-enabled board. This adapter breaks out the I2C pins from the Qwiic connectors to pins that you can easily solder with your favorite I2C-enabled device.The Qw 510Auf Lager
Min.: 1
Mult.: 1

Adapters Qwiic Adapter
SparkFun SparkFun Zubehör The SparkFun Qwiic Shield for Arduino Nano provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Arduino Nano board. The Qwiic shield connects the I2C bus (GND 3.3V SDA and SCL) on your Arduino Nano to four Spark
Datenblatt
12Auf Lager
Min.: 1
Mult.: 1
Shields Qwiic Shield
SparkFun SparkFun Zubehör Have you ever wanted to control something powerful or have you ever needed to turn on/off a high power device from your Arduino or another low powered microcontroller? The SparkFun Qwiic Single Relay provides you with the easiest to use relay yet. Th
Datenblatt
44Auf Lager
Min.: 1
Mult.: 1
Nein
Accessories Qwiic Single Relay
SparkFun SparkFun Zubehör Keypads are very handy input devices but who wants to tie up seven GPIO pins wire up a handful of pull-up resistors and write firmware that wastes valuable processing time scanning the keys for inputs? The SparkFun Qwiic Keypad comes fully assembl 5Auf Lager
11Auf Bestellung
Min.: 1
Mult.: 1
Nein
Accessories
SparkFun SparkFun Zubehör Translating physical forces into digital data usually requires managing multiple components but the SparkFun Qwiic Scale simplifies the entire process. With the on-board NAU7802 this Qwiic breakout board acts as an all-in-one amplifier and Analog-t
Datenblatt
74Auf Lager
130erwartet ab 06.07.2026
Min.: 1
Mult.: 1
Nein
Breakout Boards Qwiic Scale
SparkFun SparkFun Zubehör Buttons are an easy and tactile way to interface with your project but why deal with debouncing polling and wiring up pull-up resistors? The SparkFun Qwiic Button Breakout simplifies all those worries away into an easy-to-use I2C device. Utilizing
Datenblatt
11Auf Lager
Min.: 1
Mult.: 1
Breakout Boards
SparkFun SparkFun Zubehör The SparkFun Qwiic Shield for Thing Plus provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Thing Plus or Feather boards. Since the Thing Plus and Feather footprints are interchangable you can use this shield w
Datenblatt
14Auf Lager
Min.: 1
Mult.: 1
Shields Qwiic Shield
SparkFun SparkFun Zubehör The SparkFun weather:bit is a fully loaded "carrier" board for the micro:bit that when combined with the micro:bit provides you with a fully functional weather station. With the weather:bit you will have access to barometric pressure relative humi
Datenblatt
2Auf Lager
Min.: 1
Mult.: 1
Carrier Boards Weather:bit
SparkFun SparkFun Zubehör This SparkFun Qwiic Pro Micro BoogieBoard was a limited edition version of the Qwiic Pro Micro. We are now out of stock and are not reproducing it. The SparkFun Qwiic Pro Micro BoogieBoard is a Special Edition version of the SparkFun Qwiic Pro Micro Nicht auf Lager
Min.: 1
Mult.: 1
Nein
Qwiic Pro Micro BoogieBoards
SparkFun SparkFun Zubehör This is not your normal Passive Infrared (PIR) sensor! The SparkFun AK9753 Human Presence Sensor Breakout is a Qwiic-enabled 4-channel Nondispersive Infrared (NDIR) sensor. Each channel has a different field of view so not only can the AK9753 detec
Datenblatt
N/A
Min.: 1
Mult.: 1

Sensors Presence Sensor