|
|
Pressure Sensor Development Tools This is a force sensitive resistor with a square 1.75x1.5" sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force the lower the resistance. When no pressure is bein
- SEN-09376
- SparkFun
-
1:
CHF 15.43
-
8In Stock
|
Mouser Part No
474-SEN-09376
|
SparkFun
|
Pressure Sensor Development Tools This is a force sensitive resistor with a square 1.75x1.5" sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force the lower the resistance. When no pressure is bein
|
|
8In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Force Sensors & Load Cells This very long force sensitive resistor - over 2 feet - has a sensing area of 0.25x24". This FSR from Interlink Electronics will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force the lower
- SEN-09674
- SparkFun
-
1:
CHF 28.30
-
10In Stock
|
Mouser Part No
474-SEN-09674
|
SparkFun
|
Force Sensors & Load Cells This very long force sensitive resistor - over 2 feet - has a sensing area of 0.25x24". This FSR from Interlink Electronics will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force the lower
|
|
10In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Board Mount Temperature Sensors PT100 Sensor
- SPX-17059
- SparkFun
-
1:
CHF 16.60
-
14In Stock
-
46Expected 10/9/2026
|
Mouser Part No
474-SPX-17059
|
SparkFun
|
Board Mount Temperature Sensors PT100 Sensor
|
|
14In Stock
46Expected 10/9/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Screwdrivers, Nut Drivers & Socket Drivers This is just your basic reversible screwdriver - pocket sized! Both flat and phillips heads available. Comes with pin clip and snazzy SparkFun logo.
- TOL-09146
- SparkFun
-
1:
CHF 1.38
-
36In Stock
|
Mouser Part No
474-TOL-09146
|
SparkFun
|
Screwdrivers, Nut Drivers & Socket Drivers This is just your basic reversible screwdriver - pocket sized! Both flat and phillips heads available. Comes with pin clip and snazzy SparkFun logo.
|
|
36In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Programmable Logic IC Development Tools SparkFun QuickLogic Thing Plus - EOS S3
- DEV-17273
- SparkFun
-
1:
CHF 40.34
-
19In Stock
|
Mouser Part No
474-DEV-17273
|
SparkFun
|
Programmable Logic IC Development Tools SparkFun QuickLogic Thing Plus - EOS S3
|
|
19In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Single Board Computers The micro:bit v2 Go Bundle is the quickest and most economical way to get started with the micro:bit ecosystem. While the standalone board is great for those who already have a workshop full of cables this bundle is designed for those who want to hi
- DEV-17288
- SparkFun
-
1:
CHF 25.11
-
10In Stock
|
Mouser Part No
474-DEV-17288
|
SparkFun
|
Single Board Computers The micro:bit v2 Go Bundle is the quickest and most economical way to get started with the micro:bit ecosystem. While the standalone board is great for those who already have a workshop full of cables this bundle is designed for those who want to hi
|
|
10In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Headers & Wire Housings This is a super small 2x5 pin female PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm in between each other.
- PRT-15363
- SparkFun
-
1:
CHF 1.90
-
76In Stock
|
Mouser Part No
474-PRT-15363
|
SparkFun
|
Headers & Wire Housings This is a super small 2x5 pin female PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm in between each other.
|
|
76In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Vibration Motors A vibration motor! This itty-bitty shaftless vibratory motor is perfect for non-audible indicators. Use in any number of applications to indicate to the wearer when a status has changed. All moving parts are protected within the housing. With a 2-3.
- ROB-08449
- SparkFun
-
1:
CHF 2.41
-
104In Stock
|
Mouser Part No
474-ROB-08449
|
SparkFun
|
Vibration Motors A vibration motor! This itty-bitty shaftless vibratory motor is perfect for non-audible indicators. Use in any number of applications to indicate to the wearer when a status has changed. All moving parts are protected within the housing. With a 2-3.
|
|
104In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Zigbee Modules - 802.15.4 After years of popularity with the XBee Series 1 and XBee Series 2 Pro Modules we now have the XBee Series 3 Pro which brings the best of both worlds. XBee 3 not only handles 802.15.4 and ZigBee but also BLE protocols and you can now talk to the m
- WRL-15131
- SparkFun
-
1:
CHF 30.30
-
5In Stock Restricted Availability
|
Mouser Part No
474-WRL-15131
|
SparkFun
|
Zigbee Modules - 802.15.4 After years of popularity with the XBee Series 1 and XBee Series 2 Pro Modules we now have the XBee Series 3 Pro which brings the best of both worlds. XBee 3 not only handles 802.15.4 and ZigBee but also BLE protocols and you can now talk to the m
|
|
5In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Multiprotocol Modules The Edimax 2-in-1 Wi-Fi 4 N150 & Bluetooth 4.2 Nano USB Adapter is a nano-sized USB Wi-Fi adapter with Bluetooth 4.2 that supports Wi-Fi up to 150Mbps while allowing users to connect to all the latest Bluetooth devices such as mobile phones ta
- WRL-22824
- SparkFun
-
1:
CHF 16.42
-
7In Stock
|
Mouser Part No
474-WRL-22824
|
SparkFun
|
Multiprotocol Modules The Edimax 2-in-1 Wi-Fi 4 N150 & Bluetooth 4.2 Nano USB Adapter is a nano-sized USB Wi-Fi adapter with Bluetooth 4.2 that supports Wi-Fi up to 150Mbps while allowing users to connect to all the latest Bluetooth devices such as mobile phones ta
|
|
7In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Bluetooth Development Tools - 802.15.1 The Arduino Nano 33 BLE Sense is an evolution of the traditional Arduino Nano but featuring a lot more powerful processor the nRF52840 from Nordic Semiconductors a 32-bit ARM Cortex -M4 CPU running at 64 MHz. This will allow you to make larger
- DEV-21251
- SparkFun
-
1:
CHF 53.10
-
1In Stock
|
Mouser Part No
474-DEV-21251
|
SparkFun
|
Bluetooth Development Tools - 802.15.1 The Arduino Nano 33 BLE Sense is an evolution of the traditional Arduino Nano but featuring a lot more powerful processor the nRF52840 from Nordic Semiconductors a 32-bit ARM Cortex -M4 CPU running at 64 MHz. This will allow you to make larger
|
|
1In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Raspberry Pi Accessories This 2x20 shrouded header has the same number and spacing of pins as a Raspberry Pi so you can easily connect via ribbon cable to the low-level peripherals and get hacking! This through-hole header has 40 0.1"-spaced pins and is keyed for polarity.Ch
- PRT-13054
- SparkFun
-
1:
CHF 0.852
-
52In Stock
|
Mouser Part No
474-PRT-13054
|
SparkFun
|
Raspberry Pi Accessories This 2x20 shrouded header has the same number and spacing of pins as a Raspberry Pi so you can easily connect via ribbon cable to the low-level peripherals and get hacking! This through-hole header has 40 0.1"-spaced pins and is keyed for polarity.Ch
|
|
52In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
NFC/RFID Tags & Transponders This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device.
- SEN-10127
- SparkFun
-
1:
CHF 3.89
-
27In Stock
|
Mouser Part No
474-SEN-10127
|
SparkFun
|
NFC/RFID Tags & Transponders This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device.
|
|
27In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
NFC/RFID Tags & Transponders This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device.
- SEN-10128
- SparkFun
-
1:
CHF 3.89
-
157In Stock
|
Mouser Part No
474-SEN-10128
|
SparkFun
|
NFC/RFID Tags & Transponders This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device.
|
|
157In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Force Sensors & Load Cells This is a piezoresistive force sensor from Tekscan. The harder you press the lower the sensor's resistance. Pressing hard the resistance changes from infinite to 50k. The sensor itself is thin and flexible but the resistance does not change while
- SEN-11207
- SparkFun
-
1:
CHF 25.32
-
5In Stock
|
Mouser Part No
474-SEN-11207
|
SparkFun
|
Force Sensors & Load Cells This is a piezoresistive force sensor from Tekscan. The harder you press the lower the sensor's resistance. Pressing hard the resistance changes from infinite to 50k. The sensor itself is thin and flexible but the resistance does not change while
|
|
5In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Screwdrivers, Nut Drivers & Socket Drivers What should every hacker have available to them? That's right a screwdriver (you have to get into those cases somehow). What makes screwdrivers even better is when there are a variety of interchangeable bits to use in different situations as you nee
- TOL-12891
- SparkFun
-
1:
CHF 4.43
-
8In Stock
|
Mouser Part No
474-TOL-12891
|
SparkFun
|
Screwdrivers, Nut Drivers & Socket Drivers What should every hacker have available to them? That's right a screwdriver (you have to get into those cases somehow). What makes screwdrivers even better is when there are a variety of interchangeable bits to use in different situations as you nee
|
|
8In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Keyboards Multimedia Wireless Keyboard
- WIG-14271
- SparkFun
-
1:
CHF 26.16
-
6In Stock
|
Mouser Part No
474-WIG-14271
|
SparkFun
|
Keyboards Multimedia Wireless Keyboard
|
|
6In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Antennas This is an Extremely Efficient Wide Band Flexible LTE Antenna with a small footprint. This easy to install durable flexible polymer antenna operates on greater than 45% efficiency on LTE bands from 698 3000MHz. For use in a wide array of appli
- WRL-22527
- SparkFun
-
1:
CHF 11.19
-
2In Stock
|
Mouser Part No
474-WRL-22527
|
SparkFun
|
Antennas This is an Extremely Efficient Wide Band Flexible LTE Antenna with a small footprint. This easy to install durable flexible polymer antenna operates on greater than 45% efficiency on LTE bands from 698 3000MHz. For use in a wide array of appli
|
|
2In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
DC Fans The Raspberry Pi 4 Case Fan works with Raspberry Pi 4 and the Raspberry Pi 4 Case. Designed for overclockers and other power users it keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load. The temperature-controlled
- PRT-17368
- SparkFun
-
1:
CHF 5.76
-
6In Stock
|
Mouser Part No
474-PRT-17368
|
SparkFun
|
DC Fans The Raspberry Pi 4 Case Fan works with Raspberry Pi 4 and the Raspberry Pi 4 Case. Designed for overclockers and other power users it keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load. The temperature-controlled
|
|
6In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Antenna Accessories This aluminum adapter converts the very common 1/4" thread found on camera tri-pods and mono-pods to the 5/8" 11-TPI (threads per inch) found on high-end surveying antennas and equipment. It's ideal for mounting RTK surveying antennas onto a monopod
- PRT-17546
- SparkFun
-
1:
CHF 5.94
-
91In Stock
|
Mouser Part No
474-PRT-17546
|
SparkFun
|
Antenna Accessories This aluminum adapter converts the very common 1/4" thread found on camera tri-pods and mono-pods to the 5/8" 11-TPI (threads per inch) found on high-end surveying antennas and equipment. It's ideal for mounting RTK surveying antennas onto a monopod
|
|
91In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Educational Robotic Kits This is the Wheel Encoder Kit from DAGU a simple add-on to any wheeled robot that can help measure the speed or distance the chassis travels. Each wheel encoder kit consists of two neodymium 8-pole magnets with rubber hubs and two hall-effect sensor
- ROB-12629
- SparkFun
-
1:
CHF 11.23
-
28In Stock
|
Mouser Part No
474-ROB-12629
|
SparkFun
|
Educational Robotic Kits This is the Wheel Encoder Kit from DAGU a simple add-on to any wheeled robot that can help measure the speed or distance the chassis travels. Each wheel encoder kit consists of two neodymium 8-pole magnets with rubber hubs and two hall-effect sensor
|
|
28In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Board Mount Motion & Position Sensors This basic piezo sensor from Measurement Specialties is often used for flex touch vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage
- SEN-09197
- SparkFun
-
1:
CHF 10.43
-
5In Stock
|
Mouser Part No
474-SEN-09197
|
SparkFun
|
Board Mount Motion & Position Sensors This basic piezo sensor from Measurement Specialties is often used for flex touch vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage
|
|
5In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Air Quality Sensors Carbon Monoxide Sensor MQ-7
- SEN-09403
- SparkFun
-
1:
CHF 6.60
-
21In Stock
|
Mouser Part No
474-SEN-09403
|
SparkFun
|
Air Quality Sensors Carbon Monoxide Sensor MQ-7
|
|
21In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Air Quality Sensors The MQ-9B is a CO and CH gas-detection sensor from Winsen. The sensing material of the MQ-9B is SnO2 which has a low conductivity in clean air. It detects carbon monoxide (1.5V) by cycling between high and low temperatures. The sensor s conduct
- SEN-17050
- SparkFun
-
1:
CHF 5.23
-
14In Stock
|
Mouser Part No
474-SEN-17050
|
SparkFun
|
Air Quality Sensors The MQ-9B is a CO and CH gas-detection sensor from Winsen. The sensing material of the MQ-9B is SnO2 which has a low conductivity in clean air. It detects carbon monoxide (1.5V) by cycling between high and low temperatures. The sensor s conduct
|
|
14In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Screwdrivers, Nut Drivers & Socket Drivers There's nothing worse than getting ready for a good hack and then realizing that you can't even get the box open because you don't have the right screwdriver. Sure we all have a few Phillips-head drivers and maybe a few slotted drivers but what abou
- TOL-10865
- SparkFun
-
1:
CHF 13.60
-
11In Stock
-
11On Order
|
Mouser Part No
474-TOL-10865
|
SparkFun
|
Screwdrivers, Nut Drivers & Socket Drivers There's nothing worse than getting ready for a good hack and then realizing that you can't even get the box open because you don't have the right screwdriver. Sure we all have a few Phillips-head drivers and maybe a few slotted drivers but what abou
|
|
11In Stock
11On Order
|
|
Min.: 1
Mult.: 1
|
|
|