MP2702 1A Linear Chargers

Monolithic Power Systems (MPS) MP2702 1A Linear Chargers are compatible with 1- to 2-cell Li-ion, Li-polymer, and LiFePO4 batteries. The MPS MP2702 chargers are also compatible with 2-cell to 6-cell NiMH batteries, with a maximum voltage of 26V. The chargers automatically charge batteries through four phases: trickle charge, pre-charge, constant-current (CC) fast charge, and constant-voltage charge. Connect a resistor between the dedicated ISET pin and the ground to set the charge current. Additionally, use the USBM pin to set the input current limit (IIN_LIM) before configuring the charge current.

Ergebnisse: 2
Auswählen Bild Teile-Nr.
 Herst.
Beschreibung Datenblatt Verfügbarkeit Preis (CHF) Ergebnisse in der Tabelle nach dem Einheitspreis bei Ihrer Menge filtern.
Menge RoHS ECAD Model Produkt
Batterietyp
Betriebsversorgungsspannung
Verpackung/Gehäuse
Montageart
Serie
Verpackung

Monolithic Power Systems (MPS) Batterie-Management 26V Input, 1A Linear Charger with EN Control and Programmable JEITA for 1-2 Cell
Datenblatt
2’577Auf Lager
5’000erwartet ab 17.09.2027
Cut-Tape
CHF 0.579
CHF 0.411
CHF 0.369
CHF 0.323
Anzeigen
Reel
CHF 0.265
Min.: 1
Mult.: 1
: 5’000
Charge Management Lithium Iron Phosphate (LiFePO4), Lithium-ion, Lithium Polymer, Nickel Metal Hydride (NiMH) 13.5 V QFN-10 SMD/SMT MP2702 Reel, Cut Tape

Monolithic Power Systems (MPS) Batterie-Management 26V Input, 1A Linear Charger with EN Control and Programmable JEITA for 1-2 Cell
Datenblatt
Nicht-auf-Lager-Vorlaufzeit 71 Wochen
Cut-Tape
CHF 0.945
CHF 0.682
CHF 0.614
CHF 0.54
CHF 0.505
Reel
CHF 0.471
Min.: 1
Mult.: 1
: 500
Charge Management Lithium Iron Phosphate (LiFePO4), Lithium-ion, Lithium Polymer, Nickel Metal Hydride (NiMH) 13.5 V QFN-10 SMD/SMT MP2702 Reel, Cut Tape