Alle Ergebnisse (586)

Filter

Verfügbarkeitsoptionen
Auswählen Bild Teile-Nr.
 Herst.
Beschreibung Datenblatt Verfügbarkeit Preis (CHF) Ergebnisse in der Tabelle nach dem Einheitspreis bei Ihrer Menge filtern.
Menge RoHS
Amphenol Wilcoxon Signalaufbereitung Factory configured vibration transmitter, IEPE sensor input, 2 x 4-20 mA outputs, supports single and dual output sensors; configuration details: acceleration input, 500 mV/g accelerometer sensitivity, true RMS, velocity output, 1 ips full scale, 1-1
Datenblatt
1Auf Lager
Min.: 1
Mult.: 1
Amphenol Wilcoxon Mehrleiterkabel J9T2A-500 = 500 ft roll
Datenblatt
2Auf Lager
Min.: 1
Mult.: 1
Amphenol Wilcoxon Vibrationssensoren Top exit, 105 C, 4-20 mA ( 5% @ full scale) proportional to Velocity, Equivalent Peak, 5.0 ips (127 mm/sec), 1/4-28 mounting hole (stud included), MIL-C-5015 connector.
Datenblatt
3Auf Lager
Min.: 1
Mult.: 1

Amphenol Wilcoxon Beschleunigungssensormodule Top exit, low noise floor, high sensitivity, microdot connector, base isolated, 500 mV/g, +/-5% sensitivity tolerance
Datenblatt
5Auf Lager
Min.: 1
Mult.: 1

Amphenol Wilcoxon Vibrationssensoren Top exit, 85 C, 4-20 mA ( 5% @ full scale) proportional to Acceleration, True Peak (85 C limited), 20 g (196 m/sec2), MIL-C-5015 connector.
Datenblatt
3Auf Lager
Min.: 1
Mult.: 1

Amphenol Wilcoxon Vibrationssensoren Top exit, 85 C, 4-20 mA ( 5% @ full scale) proportional to Velocity, Equivalent Peak, 5.0 ips (127 mm/sec), MIL-C-5015 connector.
Datenblatt
3Auf Lager
Min.: 1
Mult.: 1

Amphenol Wilcoxon Vibrationssensoren Compact vibration transmitter, 4-20 mA vibration sensor, 105C; 5g full scale, proportional to acceleration, RMS; ide exit 2-pin MIL-C-5015 connector, 1/4-28 captive mounting bolt
Datenblatt
9Auf Lager
Min.: 1
Mult.: 1
Amphenol Wilcoxon Beschleunigungsmesser Embedded accelerometer; 100 mV/g sensitivity, +/- 5 tolerance; 180 W power consumption, 60 A very low current draw, operates down to 3 VDC; TO5 standard housing, .36" x .38", 304L stainless steel case; weighs 3.2 grams
Datenblatt
3Auf Lager
Min.: 1
Mult.: 1
Amphenol Wilcoxon Sensorkabel/Betätigerkabel MIL-C-5015, 2 socket, IP 66, non-isolated, adapter ring 80082-01 required, blunt cut, twisted pair, braided shield, yellow, Teflon jacket, 64 ft.
Datenblatt
6Auf Lager
Min.: 1
Mult.: 1

Amphenol Wilcoxon Beschleunigungssensormodule Side exit, low frequency (0.2 Hz), IsoRing, case isolated, MIL-C-5015 connector, 500 mV/g, +/-5% sensitivity tolerance
Datenblatt
5Auf Lager
Min.: 1
Mult.: 1

Amphenol Wilcoxon Beschleunigungssensormodule Side exit, general purpose, low profile, case isolated, 100 mV/g, +/-15% sensitivity tolerance, 10 integral shielded twisted-pair cable, IP68, polyurethane jacket
Datenblatt
3Auf Lager
Min.: 1
Mult.: 1
Amphenol Wilcoxon Beschleunigungssensormodule Side exit, general purpose, 16' integral J9T2A cable, shield connected to case, 100 mV/g, +/-5% sensitivity tolerance
Datenblatt
3Auf Lager
Min.: 1
Mult.: 1

Amphenol Wilcoxon Sensor-Kleinteile u. Zubehör Mounting stud, black oxide, 1/4-28 to M8 (metric)
Datenblatt
67Auf Lager
Min.: 1
Mult.: 1



Amphenol Wilcoxon Beschleunigungssensormodule Top exit, compact, seismic, high sensitivity/low frequency, microdot connector, case grounded, 10 V/g, +/-10% sensitivity tolerance, M4 mounting thread
Datenblatt
9Auf Lager
30erwartet ab 18.09.2026
Min.: 1
Mult.: 1

Amphenol Wilcoxon Vibrationssensoren Top exit, 85 C, 4-20 mA ( 5% @ full scale) proportional to Velocity, RMS, 2.0 ips (50.8 mm/sec), MIL-C-5015 connector.
Datenblatt
5Auf Lager
Min.: 1
Mult.: 1

Amphenol Wilcoxon Beschleunigungssensormodule Top exit, case isolated, MIL-C-5015 connector, 100 mV/g, +/-5% sensitivity tolerance
Datenblatt
3Auf Lager
Min.: 1
Mult.: 1

Amphenol Wilcoxon Vibrationssensoren Top exit, 4-20 mA (+/-5% @ 40 mils) proportional to displacement, peak to peak, 1/4-28 mounting hole (stud included), MIL-C-5015 connector
Datenblatt
3Auf Lager
Min.: 1
Mult.: 1

Amphenol Wilcoxon Beschleunigungssensormodule Side exit, low noise floor, microdot connector, high sensitivity, case grounded, 500 mV/g, +/-5% sensitivity tolerance
Datenblatt
2Auf Lager
Min.: 1
Mult.: 1

Amphenol Wilcoxon Beschleunigungssensormodule Top exit, low frequency (0.2 Hz), case isolated, 500 mV/g, +/-5% sensitivity tolerance, MIL-C-5015 connector
Datenblatt
3Auf Lager
Min.: 1
Mult.: 1

Amphenol Wilcoxon Sensor-Kleinteile u. Zubehör Spot face tool, 1.25 diameter w/ integral pilot drill for 1/4-28 hole, adjustable drill depth
Datenblatt
23Auf Lager
Min.: 1
Mult.: 1

Amphenol Wilcoxon Beschleunigungssensormodule Top exit, general purpose, case isolated, 100 mV/g, +/-5% sensitivity tolerance, MIL-C-5015 connector, Class I Div 1 certified intrinsically safe
Datenblatt
16Auf Lager
Min.: 1
Mult.: 1

Amphenol Wilcoxon Beschleunigungssensormodule Top exit, low noise, low frequency (0.1 Hz), MIL-C-5015 connector, 500 mV/g, +/-5% sensitivity tolerance
Datenblatt
2Auf Lager
Min.: 1
Mult.: 1

Amphenol Wilcoxon Vibrationssensoren Top exit, 85 C, 4-20 mA ( 5% @ full scale) proportional to Velocity, Equivalent Peak, 2.0 ips (50.8 mm/sec), MIL-C-5015 connector.
Datenblatt
3Auf Lager
Min.: 1
Mult.: 1

Amphenol Wilcoxon Sensor-Kleinteile u. Zubehör Sensor Solution Kit: 4x 786A sensors, 4x R6Q-0-J9T2A-32 cables, 1x CB4 junction box, and mounting accessories
Datenblatt
3Auf Lager
Min.: 1
Mult.: 1

Amphenol Wilcoxon Vibrationssensoren Top exit, 85 C, 4-20 mA ( 5% @ full scale) proportional to Velocity, RMS, 1.0 ips (25.4 mm/sec), MIL-C-5015 connector.
Datenblatt
3Auf Lager
Min.: 1
Mult.: 1