Alle Ergebnisse (377)

Auswählen Bild Teile-Nr. Herst. Beschreibung Datenblatt Verfügbarkeit Preis (CHF) Ergebnisse in der Tabelle nach dem Einheitspreis bei Ihrer Menge filtern. Menge RoHS
Marki Microwave RF-Adapter - Abgang The BTN-0050 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance. 5Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MM1-0832L is a GaAs MMIC double balanced mixer that is designed for and operates at X through K bands. MM1-0832L is a low power K band mixer that works well as both an up and down converter. 4Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MM2-0530H is a passive MMIC triple balanced mixer. It features a broadband IF port that spans from 2 to 20 GHz, and has excellent spurious suppression. The MM2-0530H is available as a wire bondable chip or connectorized SMA package. 3Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The ADM1-0026PA is a complete LO driver solution for use with all Marki mixers up to 26.5 GHz. This single-stage packaged GaAs MMIC distributed amplifier integrates all required biasing circuitry.
3Auf Bestellung
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MM1-0312H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor. 2Auf Lager
2erwartet ab 30.10.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 6 GHz bandwidth.
16Auf Bestellung
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The BAL-0026 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 26.5 GHz bandwidth.
6Auf Bestellung
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung MMIQ-0218L is a low LO drive, passive GaAs MMIC IQ mixer that operates across a 9:1 bandwidth. This is an ultra-broadband mixer spanning 2 to 18GHz on the RF and LO ports with an IF from DC to 3 GHz.
13Auf Bestellung
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The ADM-8344 is a wideband distributed low noise amplifier capable of providing 18 dB gain and +27 dBm OIP3 from DC to 18 GHz and a low 1.4 dB typical noise figure from 4 to 7 GHz.
1erwartet ab 01.01.2027
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung A high-linearity amplifier capable of providing +23 dBm output power up to 6 GHz. The ADM1-8096PC can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
1erwartet ab 11.12.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 3 GHz bandwidth.
3erwartet ab 30.10.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The BAL-0036 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 36 GHz bandwidth.
2erwartet ab 22.12.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The BT-0018 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.
8erwartet ab 11.12.2026
Min.: 1
Mult.: 1

Marki Microwave RF-Adapter - Abgang The BTN-0065 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.
5erwartet ab 30.10.2026
Min.: 1
Mult.: 1

Marki Microwave RF-Adapter - Abgang The BTN2-0050 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.
1erwartet ab 09.09.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The C13-0140 is a broadband 1-40 GHz, 13 dB directional coupler. The multisection tri-plate stripline design exhibits excellent coupling flatness and VSWR at all ports.
1erwartet ab 24.12.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The C20-0R520 is a broadband 0.5-20 GHz, 20 dB directional coupler. The multisection tri-plate stripline design exhibits excellent coupling flatness and VSWR at all ports.
2erwartet ab 22.12.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung This coupler features a unique air-line construction that simultaneously enables extremely low loss, minimal return loss, and outstanding directivity throughout the entire frequency range to 50 GHz.
1erwartet ab 23.10.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The CBR16-0003 offers the highest directivity of any standalone 3 GHz bridge coupler on the market. It provides an extremely high degree of measurement accuracy for forward power measurements, and can also be used to measure VSWR/return loss.
3Auf Bestellung
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The CBR17-0026 offers the broadest bandwidth of any standalone bridge coupler on the market. It provides an extremely high degree of measurement accuracy for forward power measurements, and can also be used to measure VSWR/return loss.
2erwartet ab 01.09.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The EBAL-0040 is an ultra-broadband 1:2 balun (unbalanced to balanced transformer), hand-tuned for optimal amplitude and phase balance.
1erwartet ab 11.09.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MM2-0530L is a passive MMIC triple balanced mixer. It features a broadband IF port that spans from 2 to 20 GHz, and has excellent spurious suppression. The MM2-0530L is available as a wire bondable chip or connectorized SMA package.
3erwartet ab 31.12.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MMIQ-0205HSM is a miniaturized, surface-mount multi-octave 1.75-5.0 GHz IQ mixer. It features matched double balanced mixers connected with an integrated LO hybrid and RF power divider. It can be used for either upconversion or downconversion.
1erwartet ab 21.08.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MMIQ-0416H is a high linearity, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 4 to 16 GHz on the RF and LO ports with an IF from DC to 6 GHz.
1erwartet ab 23.10.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung A resistive 2-way power divider that features broadband operation from DC to 20 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.
4erwartet ab 13.01.2027
Min.: 1
Mult.: 1