SparkFun Electronics Entwicklungstools

IC-Entwicklungstools für Speicher Level Shifting microSD B/O

Entwicklungstools für Sicherheit und Authentifizierung The SparkFun ATECC508A Cryptographic Co-Processor Breakout allows you to easily add strong authentication security to your IoT node edge device or embedded system. It includes two Qwiic ports for plug and play functionality. Utilizing our handy Qwi

Entwicklungsboards und Kits - ARM The SparkFun Extended Qwiic Shield for Teensy provides you with a quick and easy way to enter SparkFun's Qwiic ecosystem with your Teensy boards. This shield connects to the I2C bus (GND 3.3V SDA and SCL) on your microcontroller to four SparkFun

Schnittstellen-Entwicklungstools The SparkFun MicroMod Update Tool is built to interface with the MicroMod Asset Tracker Carrier Board and also makes it simple to communicate directly with the u-blox SARA-R510M8S module using u-blox s sophisticated m-center cellular evaluation sof

Schnittstellen-Entwicklungstools SparkFun Pro Micro - RP2040

Entwicklungstools für multifunktionale Sensoren The MyoWare 2.0 Link Shield is designed to easily connect a MyoWare 2.0 Muscle Sensor to your Arduino microcontroller. The shield provides a 3.5mm TRS jack so that you can use a 3.5mm TRS-to-TRS cable to link the boards together. The MyoWare 2.0 Li

Entwicklungsboards und Kits - ARM Meet the Teensy 4.1 without Ethernet (Headers) a streamlined high-performance development board that's ready to use out of the box. This version takes the record-breaking 600MHz speed and expands it for large-scale projects with pre-soldered heade

IC-Entwicklungstools für Energieverwaltung The MyoWare 2.0 Power Shield is designed to easily power the MyoWare 2.0 Muscle Sensor for remote applications. The MyoWare Power Shield is equipped with snap connectors on the board so you can easily stack it to the top side of the MyoWare Muscle

Entwicklungstools anzeigen The SparkFun Micro OLED Breakout Board breaks out a small monochrome blue-on-black OLED. It s "micro" but it still packs a punch the OLED display is crisp and you can fit a deceivingly large amount of graphics on there. This breakout is perf

Entwicklungstools anzeigen Add a vibrant 16x2 RGB Text on Black Liquid Crystal Display to your custom electronics without the traditional wiring headache. The SparkFun SerLCD streamlines the entire process by mounting an AVR ATmega328P microcontroller directly to the back of

IC-Entwicklungstools für Energieverwaltung The LiPower board is based on the incredibly versatile TPS61200 boost converter. The board is configured to be used with a LiPo battery has solder jumper selectable 5V and 3.3V output and an under voltage protection of 2.6V. However the board can

Entwicklungstools für optische Sensoren This version of the QRE1113 breakout board features a digital output using a capacitor discharge circuit to measure the amount of reflection. This tiny board is perfect for line sensing when only digital I/O is available and can be used in both 3.3