MYIR MYC-Y6ULX-V2 CPU & SOM Modules

MYIR MYC-Y6ULX-V2 CPU and SOM Modules feature a system-on-module (SoM) covered with a shield and powered by the NXP i.MX6UltraLite/6ULL processor based on the Arm^® Cortex^®-A7 architecture. The SoM has a choice of G2 and Y2 sub-family processors running at 528MHz and integrated with 256MB DDR3 and 256MB NAND flash (4GB eMMC flash is optional). The boards carry out peripheral signals and IOs through a 1mm-pitch, 140-pin stamp hole expansion interface, enabling extension into embedded designs. The modules are ready to run Linux and support an industrial operating temperature range of -40°C to +85°C. MYIR MYC-Y6ULX-V2 CPU Modules deliver high performance with ultra-efficient power for industrial control, communications, HMI, smart healthcare, and the Internet of Things (IoT) applications.

Features

Peripherals and signals routed to pins:
- 1 10/100M Ethernet PHY
- 1mm-pitch, 140-pin stamp hole expansion interface
- 2x 10/100Mbps Ethernet
- 8x serial ports
- 4x I²C
- 2x CAN
- 4x SPI
- 8x ADC
- 8x PWM
- 3x I²S
- 1x parallel camera sensor interface
- 1x JTAG
- 1x 24-bit LCD interface
- Up to 97x GPIOs

Ready-to-Run Linux 5.4.3 support
528MHz NXP i.MX6UltraLite / i.MX6ULL Arm^® Cortex-A7 processor (MCIMX6G2CVM05A or MCIMX6Y2DVM05A by default)
Memory
- 256MB DDR3 SDRAM (supports up to 1GB)
- 256MB NAND flash (4GB eMMC flash is optional)
37mm x 39mm dimensions (10-layer PCB design)
3.3V/0.3A power supply
Working temperature range
- Commercial grade: 0°C to +70°C
- Industrial grade: -40°C to +85°C