Infineon Technologies PSoC®4100M ARM Mikrocontroller
Die Cypress Semiconductors PSoC®4100M ARM Mikrocontroller sind eine Produktfamilie von programmierbaren eingebetteten Systemcontrollern mit einer ARM® Cortex™-M0 CPU. Diese Mikrocontroller kombinieren programmierbare und rekonfigurierbare analoge und digitale Blöcke mit flexiblem automatischem Routing. Die PSoC®4100M ARM Mikrocontroller verfügen über ein 24MHz ARM Cortex-M0 CPU mit einer Einzelzyklus-Vervielfältigung und einem Flash-Speicher mit bis 128kb und Lesebeschleuniger. Diese Mikrocontroller sind kompatibel mit den Produkten der PSoC4-Plattform und unterstützen neue Anwendungen und Entwicklungsanforderungen. Die PSoC4100M verfügen über programmierbare analoge und digitale Untersysteme, die Flexibilität und eine Vor-Ort-Abstimmung des Designs ermöglichen.Merkmale
- 32-bit MCU subsystem
- 24MHz Arm Cortex-M0 CPU with single-cycle multiply
- Up to 128kB of flash with Read Accelerator
- Up to 16kB of SRAM
- DMA engine
- Programmable analog
- Four opamps that operate in Deep Sleep mode at very low current levels
- All opamps have reconfigurable high current pin-drive, high-bandwidth internal drive, ADC input buffering, and comparator modes with flexible connectivity allowing input connections to any pin
- Four current DACs (IDACs) for general-purpose or capacitive sensing applications on any pin
- Two low-power comparators that operate in Deep Sleep mode
- 12-bit SAR ADC with 806Ksps conversion rate
- Low power 1.71V to 5.5V operation
- 20nA stop mode with GPIO pin wakeup
- Hibernate and Deep Sleep modes allow wakeup-time versus power trade-offs
- Capacitive sensing
- Cypress Capacitive Sigma-Delta (CSD) technique provides best-in-class SNR (>5:1) and water tolerance
- Cypress-supplied software component makes capacitive sensing design easy
- Automatic hardware tuning (SmartSense™)
- Segment LCD drive
- LCD drive supported on all pins (common or segment)
- Operates in Deep Sleep mode with 4 bits per pin memory
- Serial communication
- Four independent run-time reconfigurable serial communication blocks (SCBs) with reconfigurable I2C, SPI, or UART functionality
- Timing and pulse-width modulation
- Eight 16-bit timer/counter pulse-width modulator (TCPWM) blocks
- Center-aligned, Edge, and Pseudo-random modes
- Comparator-based triggering of Kill signals for motor drive and other high-reliability digital logic applications
- Package options
- 68-pin QFN, 64-pin TQFP wide and narrow pitch, and 48-pin TQFP packages
- Up to 55 programmable GPIOs
- GPIO pins can be CapSense, LCD, analog, or digital
- Drive modes, strengths, and slew rates are programmable
- PSOC Creator Design Environment
- Integrated Development Environment (IDE) provides schematic design entry and build (with analog and digital automatic routing)
- Applications Programming Interface (API component) for all fixed-function and programmable peripherals
- Industry-standard tool compatibility
- After schematic entry, development can be done with Arm-based industry-standard development tools
Block Diagram
Veröffentlichungsdatum: 2016-04-21
| Aktualisiert: 2025-08-19
