Back to TE Connectivity

TE Connectivity / KISSLING 35 Series Sealed Battery Disconnectors

TE Connectivity's (TE) KISSLING 35 Series Sealed Battery Disconnectors range from 200A to 500A and meet demanding requirements in in-vehicle applications. The series is available with single or dual pole configurations, various mounting and locking (security) alternatives, and various shapes and colors of the operating handles. The battery disconnectors are designed to switch under full load and can handle up to five times the continuous current level for up to 10 seconds as overload current. TE KISSLING 35 Series Sealed Battery Disconnectors meet the IP67 and IP6K9K (steam cleaning) rating standards and have an operating temperature range of -40°C to +85°C.

Features

  • Designed for extreme applications
  • Single- or dual-pole configurations
  • Various mounting and locking (security) alternatives
  • Guards electrical systems from power surges, overvoltage, and environmental wear
  • Adapt to seasonal changes

Specifications

  • Common
    • 12VDC to 100VDC for low-voltage
    • Up to 1000VDC for high-voltage
    • IP67 and IP6K9K (steam cleaning) sealing
    • -40°C to +85°C operating temperature range
  • 200A
    • Overload
      • 500A at 180s
      • 1000A at 30s
    • Duty Rating Continuous
      • 200A at 70mm2
      • 300A at 95mm2
    • Thready Sizes/Torque
      • M8 = 12Nm to 13Nm
      • M10 = 15Nm to 20Nm
    • Standard, longflange, and central mounting available
    • Wire Section
      • Minimum 70mm2
      • Minimum 95mm2
  • 300A
    • Overload
      • 1200A for 240s
      • 1600A for 90s
      • 2000A for 10s
    • 300A duty rating continuous
    • Thread Sizes/Torque
      • M10 = 15Nm to 20Nm
      • M12 = 18Nm to 22Nm
    • Central and longflange mounting
    • 240mm2 minimum wire section
  • 400A
    • Overload
      • 1200A for 240s
      • 1600A for 90s
      • 2000A for 10s
    • 400A duty rating continuous
    • Thread Sizes/Torque
      • M10 = 15Nm to 20Nm
      • M12 = 18Nm to 22Nm
    • Central and longflange mounting
    • 150mm2 minimum wire section
  • 500A
    • Overload
      • 1200A for 240s
      • 1600A for 90s
      • 2000A for 10s
    • 500A duty rating continuous
    • Thread Sizes/Torque
      • M10 = 15Nm to 20Nm
      • M12 = 18Nm to 22Nm
    • Central and longflange mounting
    • 250mm2 minimum wire section

Datasheets

Accessory

Published: 2020-04-02 | Updated: 2026-09-03